View Cart

Agile AL-3200MCC Lemon Burst Flame Floyd

$699.95

Special Heel and Body Contour and Now Also With Multi-Radius for Improved Comfort and Ease of Play!

  • Multi-Radius - 12" at the nut and 16" at the 24th fret for vastly superior comfort
  • Coil tapping on both pickups for a wider range of sounds
  • Floyd Rose Special FRT S1000 fully floading bridge and locking nut
  • 3/4" solid maple cap improves overall sound quality (increases brightness of the guitar)
  • Two type V Alnico humbucker pickups.
  • 5 piece neck-through (maple/walnut) neck and dual action adjustable truss rod
  • Ebony fretboard
  • Individually hand filed frets
  • Read the "Customer Comments" link for more about the joys of playing this guitar!
    Qty:
  • Multi-radius - 12" at the nut and 16" at the 24th fret for vastly superior comfort
  • Special heel and body contour
  • 3/4" solid thick, maple cap improves overall sound quality (increases brightness of the guitar)
  • Maple cap sits over the 1 1/2” 2 piece solid mahogany body
  • Bound body, neck, and headstock
  • Nickelhardware, including die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18G)
  • Floyd Rose Special Bridge
  • Two Giovanni GVH -1 type V Alnico humbucker pickups create that classic PAF traditional sound
  • Maintains same neck angle as a typical set neck single cut guitar
  • Two volume controls, two tone controls, and a 3-way pickup selector switch allow a wide range of expressive control
  • 5 piece neck-through (maple/walnut) neck and dual action adjustable truss rod
  • Adjustable dual action truss rod in neck to offset alterations caused by changes in humidity, temperature, or new strings
  • Ebony fretboard with 24 jumbo frets and genuine mother of pearl trapezoid inlays
  • Note that photo shows 22 frets but the guitar actually ships with 24 frets.
  • High voltage, brass shaft pots for reduced noise and an improved pickup selector switch
  • Individually hand filed frets for professional feel and playability
  • D'addario 10-46 strings installed at the factory
  • Stop-bar tailpiece transfers string vibration to the body of the guitar and produces superior sustain
  • Made in South Korea
  • Special note: Due to neck angle and floyd inset, this guitar will fit, but require some additional padding when ordered with any of our EGC guitar cases.

  •